ROAD SIGN ASSIST SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE ROAD SIGN ASSIST SYSTEM

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    1. Customizing with the Multi-information display

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Settings Tab.

      3. Select the setting by referring to the table below.

        Table 1. Settings Tab

        Display

        Default

        Content

        Setting

        Relevant ECU

        RSA ON/OFF

        ON

        System ON/OFF setting

        ON or OFF

        Pre-crash safety city sensor

      4. Enter the following menus: Settings Tab / Settings / Road Sign Assist Setup

      5. Select the setting by referring to the table below.

        Table 2. Road Sign Assist Setup

        Display

        Default

        Content

        Setting

        Relevant ECU

        Notification Method

        Only Visual

        Speed limit exceeded notification method setting

        No Notification, Only Visual or Visual and Audible

        Pre-crash safety city sensor

        Excess Speed

        2 km/h (1 mph)

        Speed limit exceeded notification level setting*

        10 km/h (5 mph), 5 km/h (3 mph), 2 km/h (1 mph)

        Pre-crash safety city sensor

        Other Notifications

        Only Visual

        No overtaking notification method setting

        No Notification, Only Visual or Visual and Audible

        Pre-crash safety city sensor

        *: When the speed unit settings of the meter are changed, the displayed unit also changes.