DEFOGGER RELAY ON-VEHICLE INSPECTION


  1. REMOVE DEFOGGER RELAY

    A01DVNZE20

    1. Remove the defogger relay from the relay block No. 3.

  2. INSPECT DEFOGGER RELAY


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage not applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the defogger relay.

  3. INSTALL DEFOGGER RELAY


    1. Install the defogger relay to the relay block No. 3.