REAR SUNSHADE ASSEMBLY(for Quarter Panel) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart.

    Click here

PROCEDURE


  1. INSTALL REAR SIDE WINDOW CURTAIN ASSEMBLY LH


    1. Insert the storage tube between the package tray trim and the vehicle in the installation direction (1) shown in the illustration.

    2. Push in the removal direction (2) shown in the illustration to set the rear side window curtain assembly LH into place.

      B006EHEC01
      *1 Storage Tube - -
      B006DHE Install in this Direction (1) B006B42 Install in this Direction (2)
    3. B006FFQC02
      B006AHR Bolt
      B006EC9 Connector

      Attach the clip.

    4. Install the rear side window curtain assembly LH with the 3 bolts.

    5. Connect the connector and attach the clamp.

  2. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH

    Click here

  3. PERFORM DIAGNOSTIC SYSTEM CHECK

    Click here

  4. CHECK SRS WARNING LIGHT

    Click here