ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR


    1. A005CX3E03
      Text in Illustration
      *a

      Fulcrum Length

      25 mm
      *b

      Fulcrum Length

      180 mm

      Install the engine coolant temperature sensor with a new gasket.

      SST
      09205-76030
      Torque:
      without SST
      20 N*m  { 200 kgf*cm, 14 ft.*lbf }
      with SST
      17 N*m  { 175 kgf*cm, 13 ft.*lbf }

      Note


      • The "with SST" torque value is effective when using SST with a fulcrum length of 25 mm (0.984 in.) and a torque wrench with a fulcrum length of 180 mm (7.09 in.) Click here.

      • The "with SST" torque value is effective when SST is parallel to the torque wrench.

    2. Connect the engine coolant temperature sensor connector.

  2. INSTALL INVERTER RESERVE TANK ASSEMBLY

    Click here

  3. INSTALL FUEL INJECTOR ASSEMBLY

    Click here