FRONT SEAT INNER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (DRIVER SEAT)


    1. A01VXHZC05
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (Driver Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Driver seat belt unfastened 10 kΩ or higher
      Driver seat belt fastened Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly (driver seat).

  2. INSPECT FRONT SEAT INNER BELT ASSEMBLY (FRONT PASSENGER SEAT)


    1. A01VXHZC05
      *a

      Component without harness connected

      (Front Seat Inner Belt Assembly (Front Passenger Seat))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 Front passenger seat belt unfastened 10 kΩ or higher
      Front passenger seat belt fastened Below 1 Ω

      If the result is not as specified, replace the front seat inner belt assembly (front passenger seat).