CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY COMPONENTS
ILLUSTRATION
*1 |
CVT TYPE T OIL SEAL |
*2 |
DRIVE PLATE AND TORQUE CONVERTER ASSEMBLY SETTING BOLT |
*3 |
ENGINE WIRE |
*4 |
FLYWHEEL HOUSING UNDER COVER |
*5 |
NO. 1 TRANSMISSION CONTROL CABLE BRACKET |
*6 |
NO. 3 WATER BY-PASS HOSE |
*7 |
NO. 5 WATER BY-PASS HOSE |
*8 |
STARTER ASSEMBLY |
*9 |
TORQUE CONVERTER ASSEMBLY |
*10 |
TRANSMISSION CONTROL CABLE SUPPORT |
*11 |
TRANSMISSION OIL FILLER TUBE STRAIGHT SCREW PLUG |
*12 |
NO. 1 TRANSMISSION OIL COOLER HOSE |
*13 |
NO. 2 TRANSMISSION OIL COOLER HOSE |
*14 |
NO. 1 TRANSMISSION OIL FILLER TUBE |
*15 |
OVERFLOW PLUG |
*16 |
REFILL PLUG |
*17 |
DRAIN PLUG |
*18 |
GASKET |
*a |
BLACK COLOR: x 1 SILVER COLOR: x 5 |
- |
- |
 |
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
 |
MP grease |
 |
Clutch spline grease |
 |
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent |
★ |
Precoated part |
ILLUSTRATION
*1 |
AUTOMATIC TRANSMISSION CASE COVER |
*2 |
BREATHER PLUG HOSE |
*3 |
CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY |
*4 |
ENGINE MOUNTING BRACKET LH |
*5 |
FRONT ENGINE MOUNTING BRACKET |
*6 |
OIL COOLER ELBOW SUB-ASSEMBLY |
*7 |
OIL COOLER TUBE UNION |
*8 |
REAR ENGINE MOUNTING BRACKET |
*9 |
WIRE HARNESS CLAMP BRACKET |
*10 |
WATER HOSE CLAMP BRACKET |
*11 |
ENGINE MOUNTING STAY LH |
*12 |
UNION BOLT |
*13 |
BREATHER PLUG |
*14 |
O-RING |
*15 |
GASKET |
*16 |
WATER BY-PASS HOSE CLAMP |
*17 |
NO. 1 TRANSMISSION OIL COOLER HOSE |
*18 |
NO. 2 TRANSMISSION OIL COOLER HOSE |
*19 |
MANIFOLD STAY |
*20 |
DRIVE SHAFT BEARING BRACKET |
*21 |
BREATHER PLUG HOSE SUB-ASSEMBLY |
- |
- |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
★ |
Precoated part |
- |
- |
ILLUSTRATION
*1 |
CONTINUOUSLY VARIABLE TRANSAXLE ASSEMBLY |
*2 |
TRANSFER AND TRANSAXLE SETTING STUD BOLT |
*3 |
TRANSFER ASSEMBLY |
*4 |
ENGINE |
|
N*m (kgf*cm, ft.*lbf): Specified torque |
● |
Non-reusable part |
|
Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent |
★ |
Precoated part |