ELECTRICAL KEY OSCILLATOR(for Center Pillar) REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.

PROCEDURE

  1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)

    Click here

  2. REMOVE REAR FLOOR MAT ASSEMBLY

    Click here

  3. REMOVE REAR SEAT ASSEMBLY (for Bench Seat Type)

    Click here

  4. REMOVE REAR SEAT ASSEMBLY (for Separate Seat Type)

    Click here

  5. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY (for 3 Door)

    Click here

  6. DISCONNECT NO. 1 REAR SEAT OUTER BELT ASSEMBLY

    for 3 Door:Click here

    for 5 Door:Click here

  7. REMOVE COWL SIDE TRIM SUB-ASSEMBLY

    Click here

  8. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP (for 3 Door)

    Click hereClick here

  9. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP (for 5 Door)

    Click here

  10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP (for 5 Door)

    Click here

  11. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY (for 3 Door)

    Click hereClick here

  12. REMOVE INNER ROOF SIDE GARNISH COVER (for 3 Door)

    w/o Luggage Compartment Room Light:Click here

  13. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY (for 3 Door)

    w/ Luggage Compartment Room Light:Click here

  14. REMOVE ROOF SIDE GARNISH END COVER (for 3 Door)

    Click hereClick here

  15. REMOVE INNER ROOF SIDE GARNISH (for 3 Door)

    Click hereClick here

  16. REMOVE REAR SEAT SIDE GARNISH (for 5 Door)

    Click here

  17. REMOVE LOWER CENTER PILLAR GARNISH (for 5 Door)

    Click here

  18. REMOVE NO. 2 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY

    1. Disconnect the connector.

      B371132C01

      *A

      for 3 Door

      *B

      for 5 Door

    2. Disengage the 2 clamps to remove the No. 2 indoor electrical key antenna assembly.

      Note:

      Be careful when removing the No. 2 indoor electrical key antenna assembly. If the No. 2 indoor electrical key antenna assembly is dropped, replace it with a new one.