INTAKE AIR TEMPERATURE SENSOR INSTALLATION

PROCEDURE

1. INSTALL INTAKE AIR TEMPERATURE SENSOR

   1. Install a new gasket to the intake air temperature sensor.

   2. Using a 22 mm ball joint lock nut wrench, install the intake air temperature sensor.

      34.3 N*m

      350 kgf*cm

      25 ft.*lbf

      Note:

      Use the formula to calculate special torque values for situations where a ball joint lock nut wrench is combined with a torque wrench.

      Click hereClick hereClick here

   3. Connect the intake air temperature sensor connector.

2. INSTALL NO. 1 ENGINE UNDER COVER

   Click hereClick hereClick here