FRONT SEATBACK HEATER (w/ Front Seat Side Airbag) REMOVAL

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  3. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  4. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    A01DZTIE01

    1. Remove the 2 screws.

    2. Detach the 2 hooks in the order shown in the illustration and remove the front seat inner cushion shield LH.

  5. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01E11ZE01
      Text in Illustration
      *1 Protective Tape

      Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE FRONT SEAT CUSHION SHIELD LH

    A01E0JOE01
    Text in Illustration
    *1 Hook
    *2 Guide

    1. Remove the 2 screws.

    2. Detach the 2 hooks in the order shown in the illustration, and then detach the guide and remove the front seat cushion shield LH.

  7. REMOVE SEATBACK SPRING LH


    1. A01DW06

      Remove the seatback spring LH.

  8. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY


    1. A01E0QC

      Detach the 3 front seat airbag wire harness clamps.

    2. A01E1GC

      Remove the hog rings and fold back the separate type front seat cushion cover and rubber bands of the separate type front seatback cover.

    3. A01DWDZ

      for LHD, w/ Seat Heater System:

      Disconnect the front seatback heater assembly LH connector.

    4. A01E2S7

      Remove the 4 bolts and separate type front seatback assembly.

  9. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01DWBME01
      Text in Illustration
      *1 Fastening Tape

      Remove the hog rings and detach the 2 pieces of fastening tape.

    2. Pass the front seat airbag wire harness through the hole of the separate type front seatback cover, and then roll up the separate type front seatback cover.

    3. A01DXH4

      Remove the hog rings and detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.

    4. A01DZON

      Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.

    5. A01DZ9J

      Remove the nut and detach the separate type front seatback cover bracket.

    6. Remove the hog rings and roll up the separate type front seatback cover.

      A01DV40E01
      Text in Illustration
      *a Front view of front seatback *b Rear view of front seatback
    7. A01E2KR

      Detach the 4 claws and remove the 2 front seat headrest supports and separate type front seatback cover from the separate type front seatback pad.

  10. REMOVE FRONT SEATBACK HEATER ASSEMBLY LH


    1. A01DW4W

      Cut off the tack pins which hold down the front seatback heater assembly LH, and then remove the front seatback heater assembly LH from the separate type front seatback cover.

      Note

      Be careful not to damage the separate type front seatback cover.