THEFT DETERRENT SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips

Use these procedures to troubleshoot the theft deterrent system.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT

  3. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table A
      Fault is listed in problem symptoms table B

      B

      Go to step 5
      A

  4. OVERALL ANALYSIS AND TROUBLESHOOTING


    1. Terminals of ECU Click here


      NEXT

  5. REPAIR OR REPLACE


    NEXT

  6. CONFIRMATION TEST


    NEXT
    END