THROTTLE BODY INSPECTION

PROCEDURE

  1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY

    1. A283727C01

      *a

      Component without harness connected

      (Throttle Body with Motor Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (M-) - 2 (M+)

      20°C (68°F)

      0.3 to 100 Ω

      If the result is not as specified, replace the throttle body with motor assembly.