ПЕРЕПУСКНОЙ РАСПРЕДЕЛИТЕЛЬНЫЙ КЛАПАН РОГ СНЯТИЕ

CAUTION / NOTICE / HINT

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.

B003QVR

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE VACUUM CONTROL VALVE SET


    1. B003K1X

      Remove the bolt and disconnect the engine wire bracket.

    2. Disconnect the connector from the vacuum control valve set.

    3. B003J2T

      Disconnect the 2 vacuum hoses from the No. 2 vacuum transmitting pipe sub-assembly and No. 2 EGR valve assembly.

    4. B003RI4

      Remove the 2 bolts and vacuum control valve set from the intake manifold.

  3. REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY


    1. B003RFN

      Disconnect the vacuum hose from the No. 1 vacuum switching valve assembly.

    2. B003R19

      Remove the screw and No. 1 vacuum switching valve assembly from the bracket.