FRONT AXLE HUB BOLT REPLACEMENT

Tech Tips


  • Use the same procedures for the RH side and LH side.

  • The procedures listed below are for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 2WD)

    A01DZ5F

    1. Remove the 2 bolts and disc brake cylinder.

    2. Support the brake cylinder securely.

  3. REMOVE FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 4WD and Pre-Runner)

    A01DVD7E01

    1. Remove the bolt and brake tube bracket from the steering knuckle.

    2. A01E2RU

      Remove the 2 bolts and disc brake cylinder.

    3. Support the brake cylinder securely.

  4. REMOVE FRONT DISC

  5. REMOVE FRONT AXLE HUB BOLT

    A01DX4FE01

    1. Temporarily install 2 nuts to the hub bolts as shown in the illustration.

    2. Using SST and a screwdriver, remove the hub bolt.

      SST
      09650-17011

  6. INSTALL FRONT AXLE HUB BOLT

    A01E06SE01

    1. Temporarily install a plate washer and nut to a new hub bolt as shown in the illustration.

    2. Using a screwdriver to hold the front axle, install a new hub bolt by tightening the nut. Then remove the nut and plate washer.

    3. Remove the 2 nuts from the hub bolts.

  7. INSTALL FRONT DISC

  8. INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 4WD and Pre-Runner)

    A01E2RU

    1. Install the disc brake cylinder with the 2 bolts.

      Torque:
      123 N*m  { 1,254 kgf*cm, 91 ft.*lbf }
    2. A01DVD7E01

      Install the brake tube bracket to the steering knuckle with the bolt.

      Torque:
      29 N*m  { 296 kgf*cm, 21 ft.*lbf }

  9. INSTALL FRONT DISC BRAKE CYLINDER ASSEMBLY LH (for 2WD)

    A01DZ5F

    1. Install the disc brake cylinder with the 2 bolts.

      Torque:
      126 N*m  { 1,285 kgf*cm, 93 ft.*lbf }

  10. INSTALL FRONT WHEEL

    Torque:
    152 N*m  { 1,550 kgf*cm, 112 ft.*lbf, for 2WD (steel type) }
    121 N*m  { 1,234 kgf*cm, 89 ft.*lbf, for 2WD (aluminum type) }
    105 N*m  { 1,071 kgf*cm, 77 ft.*lbf, for 4WD and Pre-Runner }