REAR VIEW MONITOR SYSTEM(w/ Side Monitor System) TERMINALS OF ECU

  1. CHECK PARKING ASSIST ECU

    E159063E11

    1. Measure the voltage, resistance and check for pulses according to value(s) in the table below.

      Terminal No. (Symbol)

      Wiring Color

      Terminal Description

      Condition

      Specified Condition

      I3-1 (+B) - I3-3 (GND1)

      L - W-B

      Power source signal

      Always

      11 to 14 V

      I3-3 (GND1) - Body ground

      W-B - Body ground

      Ground

      Always

      Below 1 Ω

      I3-7 (IG) - I3-3 (GND1)

      L - W-B

      IG power source signal

      Engine switch on (IG)

      11 to 14 V

      I3-8 (ACC) - I3-3 (GND1)

      P - W-B

      ACC power source signal

      Engine switch on (ACC)

      11 to 14 V

      I2-11 (CV-) - I3-3 (GND1)

      W - W-B

      Rear television camera ground

      Always

      Below 1 V

      I2-12 (CV+) - I2-11 (CV-)

      R - W

      Rear television camera display signal (NTSC) input

      Engine switch on (IG), shift lever in R

      Pulse generation

      (See waveform 1)

      Engine switch on (IG), shift lever in R, screen blacked out by covering camera lens

      Pulse generation

      (See waveform 2)

      I2-13 (CGND) - I3-3 (GND1)

      GR - W-B

      Rear television camera shielded ground

      Always

      Below 1 V

      I2-14 (CB+) - I3-3 (GND1)

      B - W-B

      Power source to rear television camera

      Engine switch on (IG), shift lever in R

      5.8 to 7.05 V
    2. E159949E01

      Using an oscilloscope, check waveform 1.

      Table 1. Measurement Condition

      Item

      Content

      Terminal No. (Symbol)

      I2-12 (CV+) - I2-11 (CV-)

      Tool Setting

      0.2 V/DIV., 50 μsec./DIV.

      Condition

      Engine switch on (IG), shift lever in R
    3. E164781E01

      Using an oscilloscope, check waveform 2.

      Table 2. Measurement Condition

      Item

      Content

      Terminal No. (Symbol)

      I2-12 (CV+) - I2-11 (CV-)

      Tool Setting

      0.2 V/DIV., 50 μsec./DIV.

      Condition

      Engine switch on (IG), shift lever in R, screen blacked out by covering camera lens