AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE

  1. INSTALL AIR FUEL RATIO SENSOR

    1. A273330C01

      *1

      Fulcrum Length

      Using SST, install the air fuel ratio sensor.

      09224-00010

      without SST

      44 N*m

      449 kgf*cm

      32 ft.*lbf

      with SST

      40 N*m

      408 kgf*cm

      30 ft.*lbf

      Tip:

      • Use a torque wrench with a fulcrum length of 300 mm (11.8 in.). When using a torque wrench with afulcrum length that is not 300 mm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification.

        Click hereClick hereClick here

      • Make sure SST and the wrench are connected in a straight line.

    2. Install the harness clamp.

  2. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click hereClick here

  3. INSPECT FOR EXHAUST GAS LEAK

    Click hereClick here

  4. PERFORM INITIALIZATION

    Click here