WIPER SWITCH REMOVAL

PROCEDURE

  1. REMOVE STEERING COLUMN COVER

    Note:

    Removing the steering column cover (lower) in the incorrect order will cause the parts to break.

    1. Release the tilt lever, and fully extend and lower the steering column.

    2. E264967

      Turn the steering wheel assembly to the left and remove the screw.

    3. Turn the steering wheel assembly to the right and remove the screw.

    4. E264968

      Disengage the 4 claws.

    5. E264969

      Disengage the 2 claws and remove the steering column cover (lower).

    6. E264970

      Disengage the 2 claws and remove the steering column cover (upper).

  2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

    1. Turn the steering wheel assembly to the left.

    2. E264971C01

      *a

      Screwdriver

      Disconnect each connector.

    3. Disengage the claw and remove the windshield wiper switch assembly as shown in the illustration.

      Note:

      If the claw is pushed with excessive force, it may break.