STARTER REMOVAL

PROCEDURE

  1. PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notice before proceeding with work.

    Click hereClick hereClick hereClick here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click hereClick hereClick hereClick hereClick hereClick here

  3. REMOVE NO. 1 ENGINE UNDER COVER

  4. REMOVE STARTER ASSEMBLY

    1. A165843

      Open the terminal cap.

    2. Remove the nut and disconnect terminal 30.

    3. Disconnect the connector.

    4. Remove the 2 bolts and starter assembly.