REAR CRANKSHAFT OIL SEAL REMOVAL

PROCEDURE

  1. REMOVE MANUAL TRANSAXLE ASSEMBLY

    (Click here)

  2. REMOVE CLUTCH COVER ASSEMBLY

    Click here

  3. REMOVE CLUTCH DISC ASSEMBLY

    Click here

  4. REMOVE FLYWHEEL WITH DAMPER ASSEMBLY

    1. A315454E01

      Using SST, fix the flywheel with damper assembly.

      SST

      PZ4TB-04939-38

    2. A315455E01

      Using SST, remove the 8 bolts and flywheel with damper assembly.

      SST

      PZ4TB-04910-18

    3. Remove SST.

    4. A315456

      Remove the crankshaft position sensor plate from the crankshaft.

  5. REMOVE REAR ENGINE OIL SEAL

    1. A315457E01

      Using a screw driver, pry out the rear engine oil seal.

      Table 1. Text in Illustration

      *a

      Protective Tape
      Note:

      Do not damage the rear engine oil seal press fit hole, crankshaft or the surface of the timing chain cover plate.

      Tip:

      Tape the screw driver tip before use.