AUTOMATIC HIGH BEAM SYSTEM, Diagnostic DTC:U023A

DTC Code DTC Name
U023A Lost Communication With Image Processing Module "A"

DESCRIPTION

These DTCs are stored if a CAN communication malfunction occurs between the main body ECU (multiplex network body ECU) and other ECUs.

DTC No. Detection Item DTC Detection Condition Trouble Area
U023A Lost Communication With Image Processing Module "A" The main body ECU (multiplex network body ECU) does not receive data from the forward recognition camera for approximately 10 seconds or more.

  • CAN communication system

  • Forward recognition camera

PROCEDURE


  1. CLEAR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

    5. Clear the DTCs.


      Body Electrical > Main Body > Clear DTCs
      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK FOR DTC


    1. Connect the GTS to the DLC3.

    2. Turn the power switch on (IG).

    3. Wait 20 seconds or more.

    4. Turn the GTS on.

    5. Enter the following menus: Body Electrical / Main Body / Trouble Codes.

    6. Check for DTCs.


      Body Electrical > Main Body > Trouble Codes
      OK
      DTCs are not output.
      Result
      Proceed to
      OK
      NG

    OK

    USE SIMULATION METHOD TO CHECK Click here

    NG

    GO TO CAN COMMUNICATION SYSTEM Click here