FRONT STABILIZER BAR(for 2WD) REMOVAL

CAUTION / NOTICE / HINT

Note

Be sure to read the "PRECAUTION" thoroughly before servicing.

Click here

PROCEDURE


  1. AIR SUSPENSION CONTROL PROHIBITED (w/ Air Suspension)

    Click here

  2. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY

    Click here

  3. REMOVE TRANSMISSION UNDER COVER

    Click here

  4. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY

    Click here

  5. REMOVE FRONT SUSPENSION MEMBER BRACE

    Click here

  6. REMOVE STRUT BAR BRACKET SUPPORT SUB-ASSEMBLY

    Click here

  7. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. B006BMZ

      Remove the 2 nuts and front stabilizer link assembly LH from the lower No. 2 suspension arm assembly LH and front stabilizer bar.

      Tech Tips

      If the ball joint turns together with the nut, use a 8 mm hexagon wrench to hold the stud bolt.

  8. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Perform the same procedure as for the LH side.

  9. REMOVE FRONT STABILIZER BAR


    1. B005T72

      Remove the 4 bolts and 4 nuts, and front stabilizer bar.

      Tech Tips


      • The stabilizer bracket and bush are built onto the stabilizer bar. If the bracket and/or bush detach from the bar, replace the bar.

      • Be careful not to drop the nuts.