NEUTRAL POSITION SWITCH INSPECTION

PROCEDURE

  1. INSPECT NEUTRAL POSITION SWITCH

    1. C341833C01

      *a

      Component without harness connected

      (Neutral Position Switch)
      V113147

      Pushed
      V113148

      Released

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      1 - 2

      Pushed

      Below 1 Ω

      1 - 2

      Released

      10 kΩ or higher

      If the result is not as specified, replace the neutral position switch.