HEADLIGHT CLEANER MOTOR REMOVAL

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight cleaner motor and pump assembly removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Front bumper assembly Front television camera view adjustment Panoramic view monitor system

Click here for Initialization

Click here for Calibration

PROCEDURE


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    1. B007XN2C02
      B007Z37 Remove in this Direction

      Loosen the clip and remove the headlight cleaner hose as shown in the illustration.

    2. B007XENC02
      B007Z37 Remove in this Direction

      Disconnect the connector.

    3. Remove the headlight cleaner motor and pump assembly as shown in the illustration.