ТЯГА ПЕДАЛИ АКСЕЛЕРАТОРА СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE ACCELERATOR PEDAL ROD

    Note


    • Avoid excessive force to the accelerator pedal sensor.

    • Do not disassemble the accelerator pedal sensor assembly.

    • This accelerator pedal does not require lubrication.

      Do not apply oil or lubricant to the accelerator pedal sensor assembly.

      If applied, the accelerator pedal rod assembly must be replaced.


    1. A01E2EAE01

      Disconnect the accelerator pedal position sensor connector.

    2. Remove the 2 bolts and accelerator pedal rod.