REAR SEAT OUTER BELT ASSEMBLY INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY


    1. A004IAME01
      Text in Illustration
      *1 Retractor
      *a Unlocked
      *b Locked
      *c 27°

      Before installing the rear seat 3 point type outer belt assembly, check the ELR function.

      Note

      Do not disassemble the retractor.


      1. When the inclination of the retractor is 12° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 27°, check that the belt locks.

        If the result is not as specified, replace the rear seat 3 point type outer belt assembly.