FRONT SEATBACK HEATER (for Separate Seat Type) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL FRONT SEATBACK HEATER ASSEMBLY LH


    1. Set the front seatback heater assembly LH on the separate type front seatback cover.

    2. Using a tacker, install the front seatback heater assembly LH to the separate type front seatback cover with 6 new tack pins as shown in the illustration.

      Note

      Do not substitute other metal parts for tack pins.

      A01E30FE01
      Text in Illustration
      *1 Tack Pin *2 Separate Type Front Seatback Cover
      *3 Listing Pocket of Separate Type Front Seatback Cover - -

  2. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

      A01DYTWE01
      Text in Illustration
      *A for Vinyl Seat, for Cloth Seat *B for Leather Seat
      *1 Hog Ring Pliers - -
      *a Front view of front seatback *b Rear view of front seatback

    2. Attach the 4 claws to install the 2 front seat headrest supports.

    3. A01DYBL

      Pass the straps of the separate type front seatback cover through the holes of the separate type front seatback pad.

    4. A01DVBFE03
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, attach the 2 straps of the separate type front seatback cover to the separate type front seatback spring assembly with new hog rings.

    5. Using hog ring pliers, attach the separate type front seatback cover with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

    6. Attach the 2 pieces of fastening tape.

      A01DZGVE01
      Text in Illustration
      *1 Hog Ring Pliers *2 Fastening Tape

    7. Install the front seatback assembly with the 4 bolts.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }
    8. A01DWDZ

      for LHD, w/ Seat Heater System:

      Connect the front seatback heater assembly LH connector.

    9. A01DYHHE01
      Text in Illustration
      *1 Hog Ring Pliers

      Using hog ring pliers, attach the separate type front seat cushion cover to the front seat cushion frame sub-assembly LH with new hog rings.

      Note


      • Be careful not to damage the cover.

      • When installing the hog rings, avoid wrinkling the cover.

  3. INSTALL FRONT SEATBACK HINGE PLATE (for Walk in Seat Type)


    1. A01DZH2

      Apply MP grease to the location shown in the illustration.

      Text in Illustration
      A01E2TX MP Grease
    2. A01E0NF

      Install the front seatback hinge plate.

  4. INSTALL SEAT TRACK CONTROL CABLE BRACKET RH (for Walk in Seat Type)


    1. A01E1A4

      Apply MP grease to the location shown in the illustration.

      Text in Illustration
      A01E2TX MP Grease
    2. A01DXWV

      Attach the hook to install the seat track control cable bracket RH.

    3. Install a new E-ring.

  5. INSTALL SEAT TRACK CONTROL CABLE BRACKET LH (for Walk in Seat Type)

    Tech Tips

    Use the same procedure described for the RH side.

  6. INSTALL SEATBACK SPRING LH


    1. A01DXBM

      Install the seatback spring LH.

  7. INSTALL FRONT SEAT CUSHION SHIELD RH

    A01E2XOE01
    Text in Illustration
    *1 Guide
    *2 Hook

    1. Attach the guide and 2 hooks in the order shown in the illustration to install the front seat cushion shield LH.

    2. Install the 2 screws.

  8. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH


    1. A01DVLF

      Attach the claw to install the reclining adjuster release handle LH.

  9. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    A01E1X9E01

    1. Attach the 2 hooks in the order shown in the illustration to install the front seat inner cushion shield LH.

    2. Install the 2 screws.

  10. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  11. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  12. INSTALL FRONT SEAT ASSEMBLY

    Click here

  13. INSPECT FRONT SEAT ASSEMBLY


    1. Check the seat heater operation.


      1. Turn the ignition switch to ON.

      2. Turn the seat heater switch on.

      3. Wait 5 minutes or more and confirm that the seat surface becomes warm.