REAR SUSPENSION MEMBER INSTALLATION

PROCEDURE


  1. INSTALL REAR SUSPENSION MEMBER SUB-ASSEMBLY


    1. B008J2LC01
      *a Attachment Placement Positions

      Place wooden blocks or plate lift attachments on an engine lifter, and then set the rear suspension member sub-assembly so that the attachments are in the positions shown in the illustration.

      Note


      • Place the wooden blocks or plate lift attachments so that the rear suspension member sub-assembly is level.

      • As the rear suspension member sub-assembly is very heavy, be sure to support it securely.

    2. B008HIW

      Install the rear suspension member and 2 rear upper rear suspension member cushions with the 2 bolts and 2 nuts.

      Torque:
      for bolt
      102 N*m  { 1040 kgf*cm, 75 ft.*lbf }
      for nut
      125 N*m  { 1275 kgf*cm, 92 ft.*lbf }

  2. CONNECT WIRE HARNESS


    1. B008GVDC01
      *A for 2WD
      *B for AWD

      Attach the 3 clamps and connect the wire harness.

  3. INSTALL REAR STABILIZER BAR

    Click here

  4. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for LH Side)

    Click here

  5. INSTALL REAR NO. 1 STABILIZER BAR BRACKET (for RH Side)

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION (for AWD)

    Click here

  7. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY (for AWD)

    Click here

  8. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY (for AWD)

    Click here

  9. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY LH

    Click here

  10. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY LH

    Click here

  12. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  13. TEMPORARILY INSTALL REAR UPPER CONTROL ARM ASSEMBLY LH

    Click here

  14. TEMPORARILY INSTALL REAR UPPER CONTROL ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  15. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH

    Click here

  16. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  17. INSTALL REAR AXLE CARRIER SUB-ASSEMBLY LH

    Click here

  18. INSTALL REAR AXLE CARRIER SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  19. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY LH

    Click here

  20. TEMPORARILY INSTALL REAR NO. 2 SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  21. INSTALL REAR TRAILING ARM ASSEMBLY LH

    Click here

  22. INSTALL REAR TRAILING ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  23. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY LH

    Click here

  24. TEMPORARILY INSTALL REAR NO. 1 SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  25. CONNECT REAR NO. 1 SHOCK ABSORBER BRACKET LH

    Click here

  26. CONNECT REAR NO. 1 SHOCK ABSORBER BRACKET RH

    Tech Tips

    Use the same procedure described for the LH side.

  27. INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH

    Click here

  28. STABILIZE SUSPENSION

    Click here

  29. TIGHTEN REAR UPPER CONTROL ARM ASSEMBLY LH

    Click here

  30. TIGHTEN REAR UPPER CONTROL ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  31. TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY LH

    Click here

  32. TIGHTEN REAR NO. 2 SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  33. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY LH

    Click here

  34. TIGHTEN REAR NO. 1 SUSPENSION ARM ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  35. TIGHTEN REAR SHOCK ABSORBER ASSEMBLY LH

    Click here

  36. TIGHTEN REAR SHOCK ABSORBER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  37. INSTALL REAR DISC BRAKE DUST COVER SUB-ASSEMBLY LH

    Click here

  38. INSTALL REAR DISC BRAKE DUST COVER SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  39. CONNECT PARKING BRAKE WIRE ASSEMBLY NO.1

    Click here

  40. INSTALL REAR SUSPENSION BRACE SUB-ASSEMBLY

    Click here

  41. INSTALL REAR STABILIZER LINK ASSEMBLY LH

    Click here

  42. INSTALL REAR STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  43. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH (for 2WD)

    Click here

  44. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY RH (for 2WD)

    Tech Tips

    Use the same procedure described for the LH side.

  45. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY LH (for AWD)

    Click here

  46. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY RH (for AWD)

    Tech Tips

    Use the same procedure described for the LH side.

  47. INSTALL REAR DISC

    Click here

  48. CONNECT REAR DISC BRAKE CALIPER ASSEMBLY LH

    Click here

  49. CONNECT REAR DISC BRAKE CALIPER ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  50. INSTALL REAR AXLE SHAFT NUT LH (for AWD)

    Click here

  51. INSTALL REAR AXLE SHAFT NUT RH (for AWD)

    Tech Tips

    Use the same procedure described for the LH side.

  52. INSPECT REAR AXLE HUB BEARING LOOSENESS

    Click here

  53. INSPECT REAR AXLE HUB RUNOUT

    Click here

  54. STAKE REAR AXLE SHAFT NUT LH (for AWD)

    Click here

  55. STAKE REAR AXLE SHAFT NUT RH (for AWD)

    Tech Tips

    Use the same procedure described for the LH side.

  56. CONNECT REAR SKID CONTROL SENSOR WIRE LH (for 2WD)


    1. w/o AVS:

      Click here

    2. w/ AVS:

      Click here

  57. CONNECT REAR SKID CONTROL SENSOR WIRE RH (for 2WD)

    Tech Tips

    Use the same procedure described for the LH side.

  58. CONNECT REAR SPEED SENSOR LH (for AWD)


    1. w/o AVS:

      Click here

    2. w/ AVS:

      Click here

  59. CONNECT REAR SPEED SENSOR RH (for AWD)

    Tech Tips

    Use the same procedure described for the LH side.

  60. INSTALL REAR SUSPENSION ARM COVER LH

    Click here

  61. INSTALL REAR SUSPENSION ARM COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  62. INSTALL REAR WHEEL

    Click here

  63. INSPECT AND ADJUST REAR WHEEL ALIGNMENT

    Click here

  64. CHECK FOR SPEED SENSOR SIGNAL

    Click here

  65. HEIGHT CONTROL SENSOR SIGNAL INITIALIZATION

    Click here

  66. PERFORM INITIALIZATION

    Click here