STOP AND START SYSTEM CANCEL SWITCH ASSEMBLY REMOVAL

CAUTION / NOTICE / HINT

Tip:

  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE

  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for Hatchback, Wagon)

    Click here

  2. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL (for Sedan)

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Hatchback, Wagon)

  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Sedan)

    Click here

  5. REMOVE SHIFTING HOLE BEZEL (for Hatchback, Wagon)

  6. REMOVE SHIFTING HOLE BEZEL (for Sedan)

    Click here

  7. REMOVE POSITION INDICATOR HOUSING ASSEMBLY (for Hatchback, Wagon)

  8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Hatchback, Wagon)

    Click here

  9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (for Sedan)

    Click here

  10. REMOVE UPPER CONSOLE PANEL (for Hatchback, Wagon)

    Click here

  11. REMOVE UPPER CONSOLE PANEL (for Sedan)

    Click here

  12. REMOVE ECO RUN CANCEL SWITCH ASSEMBLY (COMBINATION SWITCH ASSEMBLY)

    1. C326557

      Disengage the 4 claws to remove the eco run cancel switch assembly (combination switch assembly) from the upper console panel.