INTAKE AIR TEMPERATURE SENSOR (w/ EGR Cooler) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE ENGINE COVER SUB-ASSEMBLY


    1. A01E1YJ

      Remove the 3 bolts, 2 nuts and cover.

  3. REMOVE INTAKE AIR TEMPERATURE SENSOR


    1. A01DXTE

      Disconnect the IAT sensor connector.

    2. Using a 22 mm deep socket wrench, remove the IAT sensor.

      Tech Tips

      Replace the IAT sensor if it is deformed, cracked or malfunctioning. It is not necessary to replace the IAT sensor each time the intercooler is replaced.