REAR DOOR OUTSIDE MOULDING REASSEMBLY

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL REAR DOOR OUTSIDE MOULDING UPPER PAD

   Tip:

   When installing the rear door outside moulding upper pad, heat the front door outside moulding using a heat light.

   Standard

   Item	Temperature
   Rear Door Outside Moulding	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the front door outside moulding excessively.

   1. When using a new front door outside moulding:

      1. Clean the surface of a new front door outside moulding.

      2. Using a heat light, heat the front door outside moulding surface.

   2. When reusing the front door outside moulding:

      1. Using a heat light, heat the front door outside moulding surface.

      2. Remove the double-sided tape from the front door outside moulding.

      3. Wipe off any tape adhesive residue with cleaner.

   3. 

      Install a new rear door outside moulding upper pad.

      1. Using a heat light, heat the front door outside moulding.

      2. Remove the peeling paper from the face of the rear door outside moulding upper pad.

         Tip:

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Install the rear door outside moulding upper pad as shown in the illustration.