NAME PLATE(for Hatchback) INSTALLATION

CAUTION / NOTICE / HINT

Tip:

When installing the name plates or emblem, heat the vehicle body and name plates or emblem using a heat light.

Table 1. Heating Temperature

Item

Temperature

Vehicle Body

40 to 60°C (104 to 140°F)

Name Plate or Emblem

20 to 30°C (68 to 86°F)
Note:

Do not heat the vehicle body, name plates or emblem excessively.

PROCEDURE

  1. INSTALL NO. 1 BACK DOOR EMBLEM

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 1 back door emblem.

    3. Remove the release paper from the No. 1 back door emblem.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Engage the 2 pins and install the No. 1 back door emblem as shown in the illustration.

      B411079C01

      *a

      Location Pin

      -

      -

  2. INSTALL BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new back door name plate.

    3. Remove the release paper from the back door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the back door name plate as shown in the illustration.

      B411077C01

      *a

      Profile of Back Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      51.4 mm (2.02 in.)

      B

      45.8 mm (1.80 in.)

      C

      157.3 mm (6.19 in.)

      D

      66.8 mm (2.63 in.)

  3. INSTALL NO. 2 BACK DOOR NAME PLATE

    1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    2. Using a heat light, heat the vehicle body and a new No. 2 back door name plate.

    3. Remove the release paper from the No. 2 back door name plate.

      Tip:

      After removing the release paper, keep the exposed adhesive free from foreign matter.

    4. Install the No. 2 back door name plate as shown in the illustration.

      B411078C02

      *a

      Profile of Back Door Panel

      -

      -

      Standard Measurement

      Area

      Measurement

      Area

      Measurement

      A

      68.3 mm (2.69 in.)

      B

      191.2 mm (7.53 in.)

      C

      48.3 mm (1.90 in.)

      D

      39.1 mm (1.54 in.)