REAR SHOCK ABSORBER DISPOSAL

PROCEDURE


  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH


    1. Hold the rear shock absorber assembly LH perpendicularly.

    2. Push down the piston rod about 60 mm (2.362 in.) by hand.

    3. A004K18

      Using a metal saw or the like, slowly cut a hole in the location shown in the illustration and let the gas out.

      Text in Illustration
      A004HD0 Area to cut a hole

      Note


      • Wear protective glasses.

      • Since the discharging gas may cause chips to scatter, cover the metal saw with a piece of cloth when making the hole.

      Tech Tips

      The gas is colorless, odorless and harmless.