IGNITION KEY CYLINDER LIGHT INSPECTION

PROCEDURE


  1. INSPECT IGNITION KEY CYLINDER LIGHT (TRANSPONDER KEY COIL)

    B004ITAC01
    *a

    Component without harness connected

    (Ignition Key Cylinder Light (Transponder Key Coil))

    1. Apply battery voltage to the connector and check that the ignition key cylinder light comes on.

      OK
      Measurement Condition Condition Specified Condition

      Battery positive (+) → 2 (ILL+)

      Battery negative (-) → 4 (ILL-)

      		 Always Ignition key cylinder light comes on

      If the result is not as specified, replace the ignition key cylinder light (transponder key coil).