IGNITION SWITCH INSPECTION

PROCEDURE

  1. INSPECT IGNITION SWITCH ASSEMBLY

    1. A296191C01

      *a

      Component without harness connected

      (Ignition Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Switch Condition

      Specified Condition

      All combinations of all terminals

      LOCK

      10 kΩ or higher

      5 (AM1) - 7 (ACC)

      ACC

      Below 1 Ω

      5 (AM1) - 7 (ACC)

      5 (AM1) - 8 (IG1)

      4 (AM2) - 3 (IG2)

      ON

      Below 1 Ω

      6 (ST1) - 5 (AM1)

      6 (ST1) - 8 (IG1)

      2 (ST2) - 4 (AM2)

      2 (ST2) - 3 (IG2)

      START

      Below 1 Ω

      If the result is not as specified, replace the ignition switch assembly.