METER / GAUGE SYSTEM

DTC Code DTC Name
HOW TO PROCEED WITH TROUBLESHOOTING

CAUTION / NOTICE / HINT

Tip:

  • Use the following procedure to troubleshoot the meter / gauge system.

  • *: Use the GTS.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

    Result

    Proceed to

    NEXT
    NEXT

  2. CUSTOMER PROBLEM ANALYSIS

    Result

    Proceed to

    NEXT
    NEXT

  3. CHECK CAN COMMUNICATION SYSTEM*

    1. Check if CAN communication DTCs are output.

      Click hereClick hereClick hereClick here

    Result

    Result

    Proceed to

    CAN communication DTCs are not output.

    A

    CAN communication DTCs are output.

    B
    B

    GO TO CAN COMMUNICATION SYSTEM

    Click here

    A

  4. CHECK FOR DTC*

    1. Check for DTCs.

      Click here

    Result

    Result

    Proceed to

    DTCs are not output.

    A

    DTCs are output.

    B
    B

    GO TO DIAGNOSTIC TROUBLE CODE CHART

    Click hereClick hereClick here

    A

  5. PROBLEM SYMPTOM CONFIRMATION

    Result

    Proceed to

    NEXT
    NEXT

  6. SYMPTOM SIMULATION

    Result

    Proceed to

    NEXT
    NEXT

  7. PROBLEM SYMPTOMS TABLE

    1. Refer to Problem Symptoms Table.

      Click hereClick hereClick hereClick here

    Result

    Proceed to

    NEXT
    NEXT

  8. CIRCUIT INSPECTION

    Result

    Proceed to

    NEXT
    NEXT

  9. REPAIR OR REPLACE

    Result

    Proceed to

    NEXT
    NEXT

  10. CONFIRMATION TEST

    Result

    Proceed to

    NEXT
    NEXT

    END