HEATED OXYGEN SENSOR INSPECTION

PROCEDURE

  1. INSPECT OXYGEN SENSOR

    1. A296733C01

      *a

      Component without harness connected:

      (Oxygen Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection

      Condition

      Specified Condition

      1 (HT1B) - 2 (+B)

      20°C (68°F)

      11 to 16 Ω

      1 (HT1B) - 4 (E2)

      Always

      10 kΩ or higher

      If the result is not as specified, replace the oxygen sensor.