REAR SEAT CUSHION HEATER(for 60/40 Split Slide Walk-in Seat Type RH Side) INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

  1. INSTALL REAR SEAT CUSHION HEATER ASSEMBLY

    B248328C02

    *1

    Tack Pin

    *2

    Name Stamp

    1. Set the seat cushion heater in place with the name stamp side facing the seat cushion cover.

    2. Install the seat cushion heater with new tack pins.

  2. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER

    Click here

  3. INSTALL REAR NO. 2 SEAT PROTECTOR

    Click here

  4. INSTALL SEAT CUSHION COVER WITH PAD

    Click here

  5. INSTALL REAR SEAT REAR CUSHION MOULDING LH

    Click here

  6. INSTALL REAR SEAT CUSHION MOULDING RH

    Click here

  7. INSTALL RECLINING ADJUSTER RELEASE HANDLE RH

    Click here

  8. INSTALL REAR SEAT UPPER RECLINING COVER RH

    Click here

  9. INSTALL REAR NO. 1 SEAT ASSEMBLY RH

    (Click here)