AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) Data Signal Circuit between Radio Receiver and Stereo Jack Adapter
| DTC Code | DTC Name |
|---|---|
| Data Signal Circuit between Radio Receiver and Stereo Jack Adapter |
DESCRIPTION
No. 2 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio receiver assembly via this circuit.
WIRING DIAGRAM
PROCEDURE
CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 2 STEREO JACK ADAPTER ASSEMBLY)
Disconnect the USB1 radio receiver assembly connector.
Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection
Condition
Specified Condition
USB1-2 (US1-) - USB2-2 (UDO-)
Always
Below 1 Ω
USB1-3 (US1+) - USB2-3 (UDO+)
Always
Below 1 Ω
USB1-5 (USG1) - USB2-5 (UJSS)
Always
Below 1 Ω
USB1-2 (US1-) - Body ground
Always
10 kΩ or higher
USB1-3 (US1+) - Body ground
Always
10 kΩ or higher
USB1-5 (USG1) - Body ground
Always
10 kΩ or higher
Result
Proceed to
OK
NG