INTAKE AIR TEMPERATURE SENSOR (w/ Intercooler) INSTALLATION


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. Using a 22 mm deep socket wrench, install a new gasket and the IAT sensor.

      Torque:
      34 N*m  { 350 kgf*cm, 25 ft.*lbf }
    2. A01DXTE

      Connect the IAT sensor connector.

  2. INSTALL ENGINE COVER SUB-ASSEMBLY

    A01E1YJ

    1. Install the cover with the 3 bolts and 2 nuts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. PERFORM INITIALIZATION


    1. Perform initialization Click here.

      Note

      Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.