REAR SEAT OUTER BELT ASSEMBLY(for Wagon) INSPECTION

PROCEDURE

  1. INSPECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY

    1. B336728C01

      *a

      Retractor

      *b

      Unlocked

      *c

      Locked

      *d

      45°

      Before installing the rear seat 3 point type outer belt assembly, check the ELR function.

      Note:

      Do not disassemble the retractor.

      When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

      If the result is not as specified, replace the rear seat 3 point type outer belt assembly.