IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

  1. INSTALL SPARK PLUG

    1. Using a 14 mm spark plug wrench, install the 4 spark plugs.

      20 N*m

      204 kgf*cm

      15 ft.*lbf

      Note:

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Install the same parts in the same combination to the original locations.

      Tip:

      Perform "Inspection After Repairs" after replacing the spark plug.

      Click hereClick here

  2. INSTALL IGNITION COIL ASSEMBLY

    1. A285311C02

      *1

      Ignition Coil Assembly Body

      *2

      Plug cap

      Install the 4 ignition coil assemblies with the 4 bolts.

      10 N*m

      102 kgf*cm

      7 ft.*lbf

      Note:

      • If a component has been dropped or subjected to a strong impact, replace it.

      • Install the same parts in the same combination to the original locations.

      Tip:

      Perform "Inspection After Repairs" after replacing the ignition coil assembly.

      Click hereClick here

    2. Connect the 4 ignition coil connectors.

  3. INSTALL NO. 2 CYLINDER HEAD COVER

    Click hereClick hereClick hereClick here