AIR CONDITIONING PRESSURE SENSOR ON-VEHICLE INSPECTION

PROCEDURE

  1. INSPECT AIR CONDITIONING PRESSURE SENSOR

    1. Install a manifold gauge set.

    2. Disconnect the connector from the air conditioning pressure sensor.

    3. Connect the positive (+) lead of a DC 5 V power source to terminal 3 and the negative (-) lead to terminal 1.

      E355107E01

    4. Connect the positive (+) lead of the voltmeter to terminal 2 and the negative (-) lead to terminal 1.

    5. Measure the voltage according to the value(s) in the table below.

      Standard Voltage

      Tester Connection

      Condition

      Specified Condition

      2(PR) - 1(-)

      Refrigerant pressure:

      0.39 to 3.187 MPa (57 to 463 psi)

      1.0 to 4.8 V

      If the result is not as specified, replace the air conditioning pressure sensor.