FRONT DOOR OUTSIDE MOULDING INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL FRONT DOOR OUTSIDE MOULDING SUB-ASSEMBLY LH

   Tip:

   When installing the front door outside moulding, heat the vehicle body and front door outside moulding using a heat light.

   Standard

   Item	Temperature
   Vehicle Body	40 to 60°C (104 to 140°F)
   Front Door Outside Moulding	20 to 30°C (68 to 86°F)

   Note:

   Do not heat the vehicle body or front door outside moulding excessively.

   1. Clean the vehicle body surface.

      1. Using a heat light, heat the vehicle body surface.

      2. Remove the double-sided tape from the vehicle body surface.

      3. Wipe off any tape adhesive residue with cleaner.

   2. Install a new front door outside moulding.

      1. Using a heat light, heat a new front door outside moulding and the vehicle body surface.

      2. Remove the peeling paper from the face of the front door outside moulding.

         Tip:

         After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the guide positions and attach the outside moulding retainer and clip to install the front door outside moulding.

         Tip:

         Press the front door outside moulding firmly to install it.