INTAKE AIR TEMPERATURE SENSOR (for DPF) INSTALLATION


  1. INSTALL INTAKE AIR TEMPERATURE SENSOR


    1. Using a 22 mm deep socket wrench, install a new gasket and the intake air temperature sensor.

      Torque:
      29 N*m  { 300 kgf*cm, 22 ft.*lbf }

    2. Connect the intake air temperature sensor connector and glow plug connector.

    3. Attach the clamp.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY


    1. Install the engine cover with the 3 bolts and 2 cap nuts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }