FUEL SYSTEM


  1. CONSTRUCTION


    1. A multiple layer plastic fuel tank assembly is used for weight reduction. This fuel tank assembly consists of 6 layers of 4 types of materials.

    2. A fuel drain mark has been provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

      B006WF3C01
      *1 Fuel Tank Assembly - -
      *a Fuel Tank Assembly Outside *b Fuel Tank Assembly Inside
      *c Fuel Tank Assembly Wall Cross Section *d High Density Polyethylene (HDPE)
      *e Regrind Material *f Adhesive
      *g Ethylene Vinyl Alcohol Copolymer (EVOH) *h Fuel Drain Mark
      *i View from Bottom Side - -