ГЕНЕРАТОР СНЯТИЕ


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

  2. REMOVE AIR CLEANER ASSEMBLY


    1. A01DZO2

      Disconnect the IAT sensor connector.

    2. Loosen the air cleaner hose clamp.

    3. Remove the 2 bolts and air cleaner.

  3. REMOVE COOLER COMPRESSOR V BELT (w/ Air Conditioning System)


    1. A01DZBJE01

      Ослабьте гайку А и болт В и снимите поликлиновой ремень.

  4. REMOVE FAN & GENERATOR V BELT (w/ Air Conditioning System)


    1. A01DVWPE01

      Ослабьте болты A и В.

    2. Ослабьте регулировочный болт C и снимите поликлиновой ремень.

  5. REMOVE FAN & GENERATOR V BELT (w/o Air Conditioning System)


    1. A01E2DLE01

      Ослабьте болты А и В и снимите поликлиновой ремень.

  6. REMOVE FAN BELT ADJUSTING BAR (w/o Air Conditioning System)


    1. A01DZK3

      Remove the 3 bolts and fan belt adjusting bar.

  7. DISCONNECT COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)


    1. A01DY5M

      Disconnect the compressor connector.

    2. Remove the 4 bolts and disconnect the cooler compressor.

      Tech Tips

      It is not necessary to completely remove the compressor. With the hoses connected to the compressor, hang the compressor on the vehicle body with a rope.

  8. REMOVE COMPRESSOR MOUNTING BRACKET (w/ Air Conditioning System)


    1. A01E1CQE01

      Remove the bolt and spacer.

    2. A01DXAJE01

      Remove the 4 bolts and compressor mounting bracket.

  9. REMOVE GENERATOR ASSEMBLY

    A01DUYE

    1. Disconnect the terminal cap.

    2. Remove the nut and generator wire.

    3. Disconnect the generator connector.

    4. A01DZ6U

      Remove the union bolt to disconnect the vacuum pump hose and remove the 2 gaskets.

    5. Remove the union bolt to disconnect the vacuum pump oil inlet hose and remove the 2 gaskets.

    6. Detach the vacuum pump oil inlet hose from the cord clip.

    7. Disconnect the vacuum pump oil outlet hose.

    8. A01DYO6

      Remove the bolt and generator.