REAR CENTER SEAT OUTER BELT ASSEMBLY (for 3 Point Type Rear Center Seat Belt) REMOVAL

CAUTION:


  • The rear No. 1 seat inner belt assembly LH cannot be disconnected from the rear seat 3 point type belt assembly RH.

  • When replacing the rear seat 3 point type belt assembly RH or rear No. 1 seat inner belt assembly LH, make sure to replace both with new ones.

  • Make sure to connect the new rear seat 3 point type belt assembly RH and new rear No. 1 seat inner belt assembly LH.


  1. REMOVE REAR SEAT HINGE COVER LH

    A01DW3P

    1. Pull the rear seat hinge cover LH to detach the 2 claws.

      Text in Illustration
      A01E2TX Pull
      A01DZ8Z Pull Up

    2. Pull up the rear seat hinge cover LH to detach the guide and remove the rear seat hinge cover LH.

  2. REMOVE REAR SEAT HINGE COVER RH

    Tech Tips

    Use the same procedures described for the LH side.

  3. REMOVE REAR SEAT ASSEMBLY


    1. A01DUYNE01
      Text in Illustration
      *1 Fold Seat Stopper Band Button
      *2 Seat Cushion Rubber Band

      Detach the fold seat stopper band button and pull the fold seat stopper band to release the seat cushion lock.

    2. Pull the rear No. 1 seat inner belt RH through the seat cushion rubber band.

    3. Fold up the rear seat cushion assembly.

    4. A01DV79

      Remove the bolt and disconnect the rear No. 1 seat inner belt assembly LH.

    5. Return the rear seat cushion assembly to its original position.

    6. A01E21IE01
      Text in Illustration
      *1 Seat Cushion Rubber Band

      Pull the rear No. 1 seat inner belt assembly LH through the seat cushion rubber band.

    7. Fold up the rear seat cushion assembly.

    8. Attach the fold seat stopper band to the vehicle body and temporarily fix the rear seat cushion assembly in place.

    9. A01DWPVE01

      Remove the 4 bolts.

    10. Detach the fold seat stopper band from the vehicle body.

    11. Lift up the seat in the direction indicated by the arrow to detach the 2 hooks and 2 guides. Then remove the rear seat assembly.

      Text in Illustration
      *1 Hook
      *2 Guide

      Note

      Be careful not to damage the vehicle body.

  4. REMOVE BACK PANEL TRIM


    1. A01E060

      Using a moulding remover, detach the 3 claws and 2 guides and disconnect the cover from the back panel trim.

    2. A01DWB6

      Using a clip remover, remove the 4 clips.

    3. Detach the 9 clips and remove the back panel trim.

  5. REMOVE REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH


    1. A01DVYO

      Remove the 2 bolts and disconnect the upper part of the rear seat 3 point type belt assembly RH.

    2. Remove the 2 bolts.

    3. Detach the 2 claws and remove the rear 3 point type belt assembly RH retractor

  6. REMOVE SEAT BELT BRACKET


    1. A01DXHN

      Remove the 2 bolts and seat belt bracket.