IGNITION COIL AND SPARK PLUG INSTALLATION

PROCEDURE

1. INSTALL SPARK PLUG

   
   

   1. Using a 14 mm spark plug wrench, install the 4 spark plugs.

      Torque:

      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

2. INSTALL IGNITION COIL ASSEMBLY

   
   

   1. Install the 4 ignition coils with the 4 bolts.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      When installing each ignition coil, do not damage the plug cap on the engine head cover opening or the upper edge of the spark plug tube.

   2. Connect the 4 ignition coil connectors.

3. INSTALL NO. 2 CYLINDER HEAD COVER

   Click here

4. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

   Click here

5. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

   Click here

6. INSTALL COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

   Click here

7. INSTALL COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

   Click here

8. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

   Click here