FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN CASE OIL SEAL


    1. Apply MP grease to the lip of a new timing chain case oil seal.

      Note

      Keep the lip free of foreign matter.

    2. B005QK9C01
      *a Oil Seal Protrusion Height

      Using SST and a hammer, tap in a new oil seal until its surface is flush with the timing chain cover assembly edge.

      SST
      09223-22010
      Oil Seal Protrusion Height
      0 to 1.0 mm (0 to 0.0394 in.)

      Note


      • Keep the lip free of foreign matter.

      • Do not tap in the timing chain case oil seal at an angle.

  2. INSTALL CRANKSHAFT TIMING GEAR KEY


    1. Install the crankshaft timing gear key to the key groove.

  3. INSTALL CRANKSHAFT PULLEY


    1. B005WCWC01
      *a Hold
      B006AHR Turn

      Align the crankshaft timing gear key with the key groove of the crankshaft pulley, and slide on the crankshaft pulley.

    2. Using SST to hold the crankshaft pulley in place, tighten the crankshaft pulley set bolt.

      SST
      09213-70011   ( 09213-70020 )
      09330-00021
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

  4. INSTALL WIRE HARNESS CLAMP BRACKET

    Click here

  5. INSTALL FAN AND GENERATOR V BELT

    Click here

  6. INSPECT FOR OIL LEAK

    Click here