SFI SYSTEM


  1. CONSTRUCTION


    1. This non-contact type accelerator pedal position sensor uses Hall ICs, which are mounted on the accelerator pedal arm.

    2. A magnetic yoke is mounted at the base of the accelerator pedal arm. This yoke moves around the 2 Hall ICs in accordance with the amount of effort that is applied to the accelerator pedal. The Hall ICs convert the changes in the magnetic flux that occur into electrical signals, and output them in the form of accelerator pedal position signals to the ECM.

    3. The Hall IC contains 2 circuits, one for the main signal, and one for the sub signal. It converts the accelerator pedal depression angles into electric signals with 2 differing characteristics and outputs them to the ECM.

      A01KX7FE01