LIGHTING SYSTEM CUSTOMIZE PARAMETERS

  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Tip:

    The following items can be customized.

    Note:

    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.

    1. Customizing with the intelligent tester

      1. Connect the intelligent tester to the DLC3.

      2. Turn the engine switch on (IG).

      3. Turn the intelligent tester on.

      4. Enter the following menus: Utility / Customize / Illuminated Entry.

      5. Select the setting by referring to the table below.

        Illuminated Entry

        Tester Display

        Description

        Default

        Setting

        ECU

        Lighting Time

        Changes the lighting time after closing all of the doors (the lights will fade out immediately when turning the engine switch from off to on (ACC) or (IG)).

        15 s

        10:30 s,00:15 s,01:7.5 s

        Main body ECU (Multiplex network body ECU)

        I/L when ACC OFF

        This function turns on the lights when the engine switch is turned from on (IG) or (ACC) to off (the room light turns on when the interior light switch is set to DOOR).

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        I/L ON W/Door Key Unlock

        This function turns on the room light when the door is unlocked with a transmitter (the room light turns on when the map light switch is set to DOOR).

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Room Light when Aprchd

        This function turns on the room light when the key is brought within the vehicle exterior detection area (the room light turns on when the map light switch is set to DOOR).

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Inside Foot Light

        This function controls the interior foot lights.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Center Console Spot Light

        Lights up the center console spot light when the engine switch is turned to on (ACC) or (IG).

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Mirror Foot Light Time

        Side step light illumination duration.

        15 s

        00:15 s,01:7.5 s,10:30 s,11:0 s

        Main body ECU (Multiplex network body ECU)

        Light Control

        This function controls the interior foot lights and inside handle illumination.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Interior Light Control

        This function controls the interior lights.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Exterior Light Control

        This function controls the side step lights.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Scuff Plate Lamp linked to Entry&Start

        This function turns on the side step light when the key is brought within the vehicle exterior detection area.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Scuff Plate Lamp linked to Wireless Key

        This function turns on the side step light when the door is unlocked with the wireless key.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Scuff Plate Lamp linked to D-Door Unlock SW

        This function turns on the side step light when the door is unlocked with the manual unlock switch.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

        Scuff Plate Lamp linked to Door open

        This function turns on the side step light when the driver door is opened.

        ON

        0:OFF,1:ON

        Main body ECU (Multiplex network body ECU)

    2. Customizing with Multi-information display

      1. Turn the engine switch on (IG).

      2. With the vehicle stationary or at a vehicle speed of less than 8 km/h (4.9 mph), press and hold the menu switch on the steering pad switch to display the meter customize mode screen.

      3. Select the setting by referring to the table below.

        Display

        Default

        Content

        Setting

        Relevant ECU

        INTERIOR LIGHTS OFF TIME ADJUSTMENT

        15 S

        Changes the lighting time after closing all of the doors (the lights will fade out immediately when turning the engine switch from off to on (ACC) or (IG)).

        7.5 S, 15 S or 30 S

        Main body ECU (Multiplex network body ECU)

        EXT. LIGHTS OFF TIME ADJUSTMENT

        15 S

        Side step light illumination duration

        OFF, 7.5 S, 15 S or 30 S

        Main body ECU (Multiplex network body ECU)